IP67 / IP65 SCREWED PLASTIC ENCLOSURES・WATERPROOF PLASTIC BOXES・NEMA6 ENCLOSURE
IP67 / IP65 SCREWED PLASTIC ENCLOSURES・WATERPROOF PLASTIC BOXES・NEMA6 ENCLOSURE -PDFCATEGORY： IP67 PLASTIC ENCLOSURE・WATERTIGHT PLASTIC BOX・OUTDOOR ENCLOSURE・INDUSTRIAL PLASTIC BOX
Waterproof plastic boxes with sure screw fixing construction.
Suitable to be uses as WiFi outdoor access points, outdoor IoT gateways, LoRaWAN devices, sensor boxes, controllers, and junction boxes.
- IP68 HIGH PERFORMANCE WATERPROOF ENCLOSURE WG series
- IP68 high performance waterproof plastic enclosure.
- Protected from immersion 24 hours at 1m depth.
- Made of UV-resistant ASA material.
- Perfect for use as outdoor gateway / network devices.
- NEW PRODUCT
- IP68 HIGH PERFORMANCE WATERPROOF JUNCTION BOX WG series
- IP68 high performance waterproof junction box.
- Protected from immersion 24 hours at 1m depth.
- Made of UV-resistant ASA material.
- Perfect solution for use as outdoor electrical junction box.
- NEW PRODUCT
- IP68 / IP67 NETWORK PLASTIC BOX - WP series
- IP67 waterproof plastic enclosure. (NEMA 6P rating enclosure)
- Easy pole mounting with optional mounting bracket.
- Suiteble for wireless instruments, LoRa WAN, and access points.
- 24 different selectable sizes are available.
- NEW SIZE
- IP67 SLOPED PLASTIC ENCLOSURE - WSC series
- Streamlined plastic case based upon ergonomic design.
- 2 different inclined angles, 13° and 18° are available.
- Suitable to medical, research equipment or card reader.
- 6 different sizes in off-white and black colors are available.
- NEW PRODUCT
- IP65 PLASTIC BOX SMALL TYPE - BCAS series
- Low-cost and small-sized waterproof ABS plastic box.
- Application : Junction box, Switch box, Controller etc.
- Protection class: IP65
- 39 different sizes available.
- IP65 PLASTIC BOX LARGE TYPE - BCAL series
- Large-sized screw fastening waterproof ABS plastic box.
- Protection class: IP65
- White gray cover and Transparent cover are available.
- 11 different sizes available.
- IP67 POLYCARBONATE ENCLOSURE - SPCP series
- Waterproof polycarbonate enclosure for severe environment.
- Protection class : IP67 (equivalent to NEMA6 rating)
- For controller, network devices, outdoor measuring instrument.
- 28 different sizes with 2 different cover types.
- IP67 JUNCTION BOX with KNOCKOUTS - SPCM series
- Waterproof polycarbonate junction box with knockouts.
- Protection class : IP67 (equivalent to NEMA6 rating)
- For junction box, control box, and wireless network devices.
- 21 different sizes with 2 different cover types.
- MOUNTING PLATE for WG・WGV
- Aluminium mounting plate for WG・WGV series.
- Material : Aluminium A1100P (t=1.5mm) / Silver anodized
- NEW PRODUCT
- TERMINAL BLOCK WTB series
- Compatible terminal blocks with WG・WGV series.
- Electrical Rating 600V 35A
- Operating Temp. Range -40℃ ~ +90℃
- 3P, 6P, 7P, 10P are available.
- NEW PRODUCT
- TERMINAL BLOCK - STB series
- Double level terminal block for SPCM・SPCP series.
- Electrical Rating : 300V 30A
- 12 different models in 2P ～ 10P are available.
- TERMINAL BLOCK JUNCTION BOX - TMB series
- Junction box with built-in terminal block.
- Made of flame-resistant ABS plastic (UL94V-0).
- Terminal block spec : 400V 17.5A
- 4, 6, 10, 15, 20, and 10P×2 pole types are available.
- TERMINAL BLOCK JUNCTION BOX - TMC series
- Integrated junction box of cable glands and terminal block.
- IP65 protection class with high oil resistant PBT material.
- Terminal block spec : 250V 15A
- 3, 4, and 6 pole types are available.
- IP68 WATER PROTECTION CABLE GLAND - AG series
- High water protection IP68 cable gland.
- Tough and heat resistant PA6FG material. (-20°C to +100°C)
- Wide selection for M8 ~ M50 thread
- Selectable in 15 sizes. (Φ2.5mm ~ Φ42 mm cable.)
- POLYAMIDE CABLE GLAND - RM series
- Low cost cable glands made from polyamide material.
- Wide selection, for M8 ~ M63 and Φ1mm ~ Φ44 mm cable.
- Protection class : IP67
- High oil resistant NBR rubber sealing and O-ring.
- WEATHERPROOF CABLE GLAND - RMW series
- Weatherproof cable glands for long-term outdoor use.
- High degradation resistant silicone sealing insert and O-ring.
- Protection class : IP67
- Thread size M8 ~ M50, Cable range Φ1mm ~ Φ38 mm.
- STRAIN RELIEF CABLE GLAND - AGSP series
- Stain relief cable gland. (Spiral cable gland.)
- Protection class : IP67
- 4 sizes for M12・M16・M20. (φ3.5mm～φ12mm cable)
- Available in light gray and black colors.
- STRAIN RELIEF CABLE GLAND - RSP series
- Strain relief cable gland for protecting cables.
- Protecting class : IP67
- 4 sizes for M12・M16・M20・M25 in light gray and black.
- Cable range : φ3.5mm～φ16mm
- GORETEX PROTECTIVE VENT - PMF series
- Screw in protective vent plugs.
- Built-in membrane filter plugs with IP68 waterproof and airflow.
- Equalize pressure and reduce condensation.
- Ｍ6, M12, and M32 models are available.
- ADHESIVE PROTECTIVE VENT FILTER - VE8 series
- Adhesive type vent filter sheet.
- Equalize pressure and reduce condensation.
- 3 different sizes from φ7.6, φ14 and φ21.5mm are available.
- NEW PRODUCT
- ADHESIVE PROTECTIVE VENT FILTER - VSC series
- Adhesive type vent filter sheet.
- Equalize pressure and reduce condensation.
- 3 different sizes from φ7.5, φ13 and φ24mm are available.
- VENTILATION LOUVER - V series
- Ventilation louver for outdoor enclosure.
- Effective for preventing condensation and heat dissipation.
- Can also be used for enclosures other than TAKACHI boxes.
- 2 different sizes in 2 colors are available.
- VENTILATION - VF series
- Hooded ventilation parts.
- Effective for preventing condensation and heat dissipation.
- 2 sizes are available.
- POLE MOUNTING BRACKET for WG・WGV
- Pole mount bracket for WG・WGV series.
- Hole milling is not required when installing the mount bracket.
- Please use with SNB・PKB pole mounting belt.
- NEW PRODUCT
- POLE MOUNTING BRACKET for WG・WGV series
- Pole mount bracket for WG・WGV series.
- Hole milling is not required when installing mount bracket.
- Can be used both for vertical and horizontal installation.
- NEW PRODUCT
- POLE MOUNTING BRACKET - WPMB-M4-3
- Bracket to mount enclosures onto a pole.
- Made from weather resistant ASA material.
- Suitable for both for vertical and horizontal mounting.
- Hole milling is required for bracket installation.
- NEW PRODUCT
- POLE MOUNTING BELT - SNB series
- Screw adjustable type stainless steel pole mounting belt.
- Belt material : SUS304
- Wide lineup of 18 sizes from 52 mm to 308 mm.
- Use with mounting bracket SSK・WGMB・WPMB series
- NEW PRODUCT
- POLE MOUNTING BELT- PKB series
- Universal pole mounting belt for outdoor enclosures.
- Stainless steel type and plastic type are available.
- Use SSK mounting bracket for installation onto a pole.
- DIN RAIL - FDR series
- 35mm aluminium DIN rail.
- For installation of terminal blocks, circuit breakers, or devices.
- Available in 53 different lengths.
- DIN-RAIL TERMINAL BLOCK END STOPPER - TKR series
- Stopper bracket for use with 35mm DIN-rail.
- Can be used to fix terminal blocks or modules.
- DIN RAIL MOUNTING BASE - DRA series
- DIN rail mounting base for 35mm DIN rail.
- Simple installation and removal via the pull lever.
- Max load : 5kg.
- 3 different sizes available.
- LOW COST DIN-RAIL MOUNTING PLATE - DRT series
- Low cost DIN rail mounting plate for 35mm DIN rail.
- Simple installation and removal by tilting action.
- Max load : 1 kg
- Material : PBT UL94V-0
- DIN RAIL MOUNTING BRACKET - CKD series
- Mounting bracket for 35mm DIN rail.
- Max load : 3kg, Can be easily detached.
- Material : Polyamide
- 3 sizes are available.
- MOUNTING PLATE for OB
- Aluminium mounting plate for OB series.
- Material : Aluminium thickness=1.5mm
- NEW PRODUCT
- WATERPROOF SEALING WASHER SZ series
- Waterproof washer for screwing onto waterproof boxes.
- Oil resistant NBR sealing material on N models.
- Superior water resistant silicone sealing material on S models.
- 8 sizes in M3, M4, M5, M6, M8, M10, M12, and M16.
- PCB MOUNTING SCREW for WG・WGV - MT4-8T
- Self tapping screw for WG・WGV series.
- Use for mounting PCB and DIN rails.
- Sold in 20 pcs pack.
- NEW PRODUCT