IP65 HINGED PLASTIC ENCLOSURES・POLYCARBONATE ENCLOSURES・NEMA ENCLOSURE
IP65 HINGED PLASTIC ENCLOSURES・POLYCARBONATE ENCLOSURES・NEMA ENCLOSURE -PDFCATEGORY： LATCH/HINGED PLASTIC BOX・WATERPROOF PLASTIC ENCLOSURE WITH DOOR・ABS PLASTIC ENCLOSURE・POLYCARBONATE BOX
Latch/hinged plastic boxes for easy open/close action.
Suitable for installing network devices, circuit breakers, IOT sensors and control units.
Suitable to be used as solar power junction boxes, outdoor WiFi access points, outdoor measuring equipment.
- IP65 LATCH-HINGED ABS PLASTIC BOX - BCAP series
- IP65 waterproof latch/hinged plastic enclosure.
- ABS plastic - Low cost type.
- White gray cover and Transparent cover are available.
- 50 different sizes are available.
- IP65 LATCH-HINGED POLYCARBONATE BOX - BCPC series
- IP65 waterproof hinged polycarbonate enclosure.
- Made of UL94V-0 and high impact polycarbonate.
- Operating Temperature -20℃～+75℃
- 50 different sizes available.
- IP65 POLYCARBONATE BOX with KEY LOCK - BCPK series
- IP65 hinged polycabonate enclosure with key lock.
- Made of UL94V-0 and high impact polycarbonate.
- Operating Temperature -20℃～+75℃
- 50 different sizes available.
- IP65 PLASTIC BOX with OUTDOOR ROOF - BCAR series
- Waterproof hinged plastic enclosure with roof for outdoor use.
- Protection class: IP65
- White gray cover and Transparent cover are available.
- 44 different sizes available.
- IP65 POLYCARBONATE BOX with OUTDOOR ROOF - BCPR series
- Waterproof hinged polycarbonate box with roof for outdoor.
- Made of UL94V-0 and high impact polycarbonate.
- Operating Temperature -20℃～+75℃
- 45 different sizes available.
- OUTDOOR ROOF for HINGED PLASTIC BOX
- Rain protection roof for BCAP・BCPC・BCPK series.
- Snap-in easy installation.
- POLE MOUNT BRACKET for HINGED PLASTIC BOX
- Pole bracket for BCAP・BCPC・BCPK・BCAR・BCPR series.
- Can be attached to hinged plastic boxes without hole milling.
- Use optional mounting belt to install onto a pole. (PKB series)
- POLE MOUNTING BELT - SNB series
- Screw adjustable type stainless steel pole mounting belt.
- Belt material : SUS304
- Wide lineup of 18 sizes from 52 mm to 308 mm.
- Use with mounting bracket SSK・WGMB・WPMB series
- NEW PRODUCT
- POLE MOUNTING BELT- PKB series
- Universal pole mounting belt for outdoor enclosures.
- Stainless steel type and plastic type are available.
- Use SSK mounting bracket for installation onto a pole.
- WATERPROOF PROTECTOR CASE - NK series
- Durable and stylish waterproof protector case.
- Impact resistant yet lightweight reinforced resin body.
- Suitable for storing delicate electronics devices in the outdoors.
- 18 different sizes, with or without interior foam.
- PLASTI BOX with HIGED COVER - OP series
- Plastic case with hinged cover.
- General purpose case for wall-mount, desk-top.
- 3 different sizes in light gray and black are available.
- IP68 WATER PROTECTION CABLE GLAND - AG series
- High water protection IP68 cable gland.
- Tough and heat resistant PA6FG material. (-20°C to +100°C)
- Wide selection for M8 ~ M50 thread
- Selectable in 15 sizes. (Φ2.5mm ~ Φ42 mm cable.)
- POLYAMIDE CABLE GLAND - RM series
- Low cost cable glands made from polyamide material.
- Wide selection, for M8 ~ M63 and Φ1mm ~ Φ44 mm cable.
- Protection class : IP67
- High oil resistant NBR rubber sealing and O-ring.
- WEATHERPROOF CABLE GLAND - RMW series
- Weatherproof cable glands for long-term outdoor use.
- High degradation resistant silicone sealing insert and O-ring.
- Protection class : IP67
- Thread size M8 ~ M50, Cable range Φ1mm ~ Φ38 mm.
- STRAIN RELIEF CABLE GLAND - RSP series
- Strain relief cable gland for protecting cables.
- Protecting class : IP67
- 4 sizes for M12・M16・M20・M25 in light gray and black.
- Cable range : φ3.5mm～φ16mm
- GORETEX PROTECTIVE VENT - PMF series
- Screw in protective vent plugs.
- Built-in membrane filter plugs with IP68 waterproof and airflow.
- Equalize pressure and reduce condensation.
- Ｍ6, M12, and M32 models are available.
- ADHESIVE PROTECTIVE VENT FILTER - VE8 series
- Adhesive type vent filter sheet.
- Equalize pressure and reduce condensation.
- 3 different sizes from φ7.6, φ14 and φ21.5mm are available.
- NEW PRODUCT
- ADHESIVE PROTECTIVE VENT FILTER - VSC series
- Adhesive type vent filter sheet.
- Equalize pressure and reduce condensation.
- 3 different sizes from φ7.5, φ13 and φ24mm are available.
- VENTILATION LOUVER - V series
- Ventilation louver for outdoor enclosure.
- Effective for preventing condensation and heat dissipation.
- Can also be used for enclosures other than TAKACHI boxes.
- 2 different sizes in 2 colors are available.
- VENTILATION - VF series
- Hooded ventilation parts.
- Effective for preventing condensation and heat dissipation.
- 2 sizes are available.
- DIN RAIL - FDR series
- 35mm aluminium DIN rail.
- For installation of terminal blocks, circuit breakers, or devices.
- Available in 53 different lengths.
- DIN-RAIL TERMINAL BLOCK END STOPPER - TKR series
- Stopper bracket for use with 35mm DIN-rail.
- Can be used to fix terminal blocks or modules.
- DIN RAIL MOUNTING BASE - DRA series
- DIN rail mounting base for 35mm DIN rail.
- Simple installation and removal via the pull lever.
- Max load : 5kg.
- 3 different sizes available.
- LOW COST DIN-RAIL MOUNTING PLATE - DRT series
- Low cost DIN rail mounting plate for 35mm DIN rail.
- Simple installation and removal by tilting action.
- Max load : 1 kg
- Material : PBT UL94V-0
- DIN RAIL MOUNTING BRACKET - CKD series
- Mounting bracket for 35mm DIN rail.
- Max load : 3kg, Can be easily detached.
- Material : Polyamide
- 3 sizes are available.